Lighting windshield
Product size: 2.3(L)×2.3(W)×2.15(H)m 2.0×2.0×2.15 m
1.8×1.8×2.15m 1.2×1.2×1.2m
Standards compliant:
The lamp windshield device is manufactured in strict accordance with the requirements of GB7000.1, IEC60598 and other relevant standards!
Function Description:
It is used to avoid drastic changes in ambient temperature during temperature measurement. It is suitable for various lamps and accessories to avoid air convection during temperature rise detection, and to prevent the impact of air temperature changes and thermal radiation from the light source on the sample. The overall humanized design of the windshield is very convenient for disassembly and installation; the windshield can be equipped with lamp mounting brackets according to customer needs; considering the connection between the test instrument and the sample and the power cord, there is a wire entry hole on the side of the windshield , It is convenient for row and plug to pass through. The position of the outlet hole is opened according to the customer's needs during installation. The plastic sheath is safe and practical.
product description:
1. At least three sides of the lamp windshield are double-layer shells, and the bottom is solid. Matte paint on inner surface. Three basic internal dimensions, each of at least 900mm, with a clearance of at least 200mm between the inner surface of the draft shield and any part of the largest luminaire.
2. The aperture of the ventilation holes in the windshield of the lamp is 1-2 mm, and the area of the ventilation holes accounts for about 40% of the total effective area of each layer (error value ±5%).
3. The material of the windshield shell: cold plate metal punching, sprayed with matte black paint, double-layer design, the spacing is about 150mm, and the thickness is between 0.6-0.8mm.
The 1.2×1.2×1.2 m windshield just meets the requirements of IEC60598 Appendix D, and is the smallest lamp windshield at present.
technical parameter:
Stencil aperture: ф2mm
Stencil ventilation rate: about 40.5%
Surface spray: black matte paint, double layer design.
Temperature sensing sheet: Φ15X1, about 90 brass sheets.
Thermocouple wire: Ω thermocouple wire, wire diameter 0.3mm.
Sample mounting bracket (can be installed for wall lamps, table lamps, ceiling lamps, etc.) 2 sets
Note: The test bracket is an optional part, size: 1m long x 1m wide x 1.5m high!
